Explanation of Screws and Other Parts

Orbital Screw (Product code: SC)

The "Orbital Screw" is the screw that holds the lens in place on the orbital part.

LINEGEAR's orbital screw (SC) is compatible with the following frames:

• Juliet
• X-Metal XX
• Penny
• X-Squared

All of these frames share the same orbital screw, except for Romeo 1 and Romeo 2.

This means that you can use the orbital screw (SC) interchangeably for these frames, as previously mentioned.

As for the Oakley X-Metal Mars, it does not use an orbital screw; instead, it uses a C-ring clip to secure the lenses in place.

Rome1 Orbital Screws

Romeo 1 come with different orbital screws of varying lengths.

Typically, Romeo 1 sunglasses feature 7.7mm length orbital screws, which are available for purchase on our website and eBay store under the product code R1-SC.

ROMEO 1 - Orbital Screw - LINEGEAR (linegear-japan.com)

However, after years of experience, we've discovered that some older generation Romeo 1 models require much longer orbital screws.

This difference could also be due to individual variations in frames.

LINEGEAR replacement orbital screws for Oakley Romeo 1 measure 7.7mm in length. Before placing an order with us, please ensure that you confirm the screw length required for your specific frame.

If you're in need of longer screws (9.8mm length) for your Romeo 1 sunglasses, you can purchase them by clicking the link below.

ROMEO 1 - Orbital Screw length : 9.8mm - LINEGEAR (linegear-japan.com)

Temple Screws (Product code: TSC)
You can use this screw for the following frames:

• Romeo 1
• Mars
• Juliet
• X-Metal XX
• X-Squared

ROMEO2 Temple Screws

For Oakley Romeo 2 temple screw, LINEGEAR has a different temple screw (product code: R2-TSC / length: 7.7 mm)

ROMEO2 - Temple Screw - LINEGEAR (linegear-japan.com)

Penny Temple Screws

LINEGEAR offers a different temple screw (product code: PE-TSC / length: 6.6 mm) for Oakley Penny sunglasses.

PENNY - Temple Screw - LINEGEAR (linegear-japan.com)

Wrench (Product code: WR)

You can use the wrench for Oakley Romeo 2 lens screw and X-Squared nose bridge screw.

Hexagon Wrench for X-SQUARED Nose bridge - LINEGEAR (linegear-japan.com)

ROMEO2 Lens Replacement Wrench - LINEGEAR (linegear-japan.com)

Temple Washers (Product code: WS)

You can use these parts with the following frames:

• Romeo 1
• Mars
• Juliet
• X-Metal XX
• Romeo 2
• X-Squared

Nose Bridge Flex Coupler (Product code: NBFC)

You can use these parts with the following frames:

1. Mars
2. Juliet
3. X-Metal XX
4. Romeo 2
5. X-Squared
6. Penny

Nose Bridge Pin (Product code: NBPIN / Length : 5.00mm)
You can use these parts with the following frames:

• Mars
• Juliet
• X-Metal XX
• Romeo 2

Back